Network Attached Storage

QNAP TS-469L 4-BAY Network Attached Storage, with 4 X 3TB Drives

QNAP TS-469L 4-BAY Network Attached Storage, with 4 X 3TB Drives
QNAP TS-469L 4-BAY Network Attached Storage, with 4 X 3TB Drives
QNAP TS-469L 4-BAY Network Attached Storage, with 4 X 3TB Drives
QNAP TS-469L 4-BAY Network Attached Storage, with 4 X 3TB Drives
QNAP TS-469L 4-BAY Network Attached Storage, with 4 X 3TB Drives
QNAP TS-469L 4-BAY Network Attached Storage, with 4 X 3TB Drives
QNAP TS-469L 4-BAY Network Attached Storage, with 4 X 3TB Drives
QNAP TS-469L 4-BAY Network Attached Storage, with 4 X 3TB Drives

QNAP TS-469L 4-BAY Network Attached Storage, with 4 X 3TB Drives

This NAS is fast and easy to use and install. The dual gigabit ethernet can be link aggregated.

It's power consumption is also relatively low at only 43 Watts in operation and 25 Wats in sleep mode. This NAS is in overall very good condition. 2 ST33000651NS 3 TB enterprise class hard drives are installed (12TB total raw storage). QNAP's most current QTS operating system is installed and its setup to a factory default login with DHCP enabled.

The QTS operating system shows all the drives are in good health. The system is ready to be setup and operate.

The memory is upgraded from the original 1Gb SO-DIMM installed with two 2GB SO-DIMMs. The motherboard is upgradeable to 4 GB, but the QTS operating system only recognizes 3GB. (The original 1GB SO-DIMM is also included, but obviously not installed in the system) The originally internal USB flash memory Disk On Module (DOM) has been replaced with a USB flash with QNAP's most current QTS operating system is installed. Includes TS-469L NAS Server with four Seagate 3TB drives installed in the hard drive trays, power cord, Quick Installation Guide, NAS Companion CD, and 2 Ethernet cables. Specifications for the TS-469L from the QNAP website.

Intel® AtomT 2.13 GHz Dual-core Processor. 1GB RAM (Expandable RAM, up to 3GB). The system memory can be increased to 3GB by installing an additional 1GB/2GB SO-DIMM RAM module. For the information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide on the QNAP web site.

4 x 3.5" or 2.5" SATA 3Gb/s hard drive or SSD. For the HDD compatibility list, please visit the compatibility page on the QNAP web site. 2 x Gigabit RJ-45 Ethernet port. Status, LAN, USB, eSATA, Power, HDD 1, HDD 2, HDD 3, HDD 4. 2 x USB 3.2 Gen 1 port (Back: 2) 5x USB 2.0 port (Front: 1; Back: 4) Support USB printer, pen drive, USB hub, and USB UPS etc.

2 x eSATA port (Back). System: Power button, USB One-Touch-Backup Button, Reset button.

177 (H) x 180 (W) x 235 (D) mm 6.97 (H) x 7.09 (W) x 9.25 (D) inch. Net weight: 3.65 kg (8.04 lbs) Gross weight: 4.65 kg (10.24 lbs).

HDD sleep: 13.7 dB In operation: 22.4 dB (with 4 x 500GB HDDs installed). Sleep mode: 25W In Operation:43W Power-off (in WOL mode): 1W (with 4 x 500GB HDD installed). 595% RH non-condensing, wet bulb: 27°C. Input: 100-240V AC, 50/60Hz, Output: 250W. K-lock security slot for theft prevention. Reserved VGA interface for maintenance. Compatible with either QNAP RM-IR001 or MCE remote controls. 1 x quiet cooling fan (9 cm, 12V DC). 2 ST33000651NS 3 TB Enterprise Class Hard Drive. This item is in the category "Computers/Tablets & Networking\Drives, Storage & Blank Media\Hard Drives (HDD, SSD & NAS)\Network Attached Storage".

The seller is "tasiemski310" and is located in this country: US. This item can be shipped to United States.

  • Model: TS-469L
  • Interface: Gigabit Ethernet
  • Type: NAS
  • Number of Bays: 4
  • MPN: TS-469L
  • Compatible With: Linux, Mac, PC
  • Brand: QNAP


QNAP TS-469L 4-BAY Network Attached Storage, with 4 X 3TB Drives