Network Attached Storage

6 RDX Slimline LED REAR NAS Lights Standard Plinth Relay Defender 1994 to 2016

6 RDX Slimline LED REAR NAS Lights Standard Plinth Relay Defender 1994 to 2016

6 RDX Slimline LED REAR NAS Lights Standard Plinth Relay Defender 1994 to 2016

Bolt On Bits now have the RDX Slimline NAS lamp slimmer than any other NAS lamp available and has DRL version in the family! All at an affordable price along with our world renowned range of connectors, plinths, guards and relay options for unrivaled choice, service and most important price ensuring you the Land Rover enthusiast is served by Land Rover enthusiasts. Up for sale is 6 RDX Slimline LED NAS lights Stop/Tail, Indicator, Fog and Reverse, 6 Standard Plinths, LED Flasher Relay for Bulbs or LEDs. Connectors are included to convert the LED lamps top fit later 300Tdi/Td5/Tdci models. 2 Amber lens RDX Slimline NAS LED indicator lights.

NAS LED Stop and Tail lights. 1 4 Pin RDX LED Flasher Relay. 6 NAS Plinths 2 3 way male connectors 4 2 way male connectors. 6 Rear Kit for 1994 to 2017 with Plug in Flasher Relay These have the latest LED lighting technology.

No other company will offer you this quality for this price. These are RDX's new Slimline range of LED NAS lamps IP 67 rated dual voltage. Yet again RDX brings you the best and most affordable lighting solutions for your Land Rover The standard plinth will require new holes drilling to allow the plinth to fix to the vehicle. These can be wired to the existing vehicle wiring loom without the need for resistors etc.

Please note there are less LEDs in the Stop and tail unit compared to the other function lamps, this has no bearing on its operation as it has passed all testing and has been credited with an E mark which means if fitted correctly and used correctly is legal in all European member states or countries that accept the E mark scheme on vehicle lighting. RDX Guards will work with the RDX Slimline range. We offer different combinations just look in our shop or telephone us with your requirements.

Bolt On Bits have been busy again developing the only proper 4 Pin Flasher Relay for Land Rover Defenders. Bolt On Bits present: RDX 4 Pin Flasher Relay No other company will offer you this RDX product. You got LEDs you need RDX 4 Pin Flasher Relay. The RDX Relay that powers OUR RDX LED Standard Lamps! A British company, A British design, A British product, for A British Car!

Why fit load resistors they defeat the whole object of less power. With our RDX LED Flasher Relay your Defender no longer needs Load Resistors! A Standard Flasher Relay works on load, this means it is designed to see 21 watts bulbs, when you fit LED lamps or bulbs the Relay can not detect the load as the LED lamp/LED bulb may only use 2 to 3 watts, resulting in fast flashing which is no good to anyone. So people fitted load resistors to imitate the load of the incandescent bulbs they have just removed, resulting in more wiring, things that get hot, melt anything near them and the best bit you are using more power than a standard bulb set up! Then came LED Flasher Relays Many have tried and failed but we haven't!

These often only could handle 30 to 40 watts which is fine for all LED vehicles but as soon as you put a trailer on it would blow or the user would fit the relay with bulbs and blow the LED Flasher Relay. Some have tried to create a 4 Pin Flasher Relay but they state it might put the trailer light on when you are not pulling a trailer plus it can only handle 40 watts ours can handle 140 watts ha ha we win. RDX 4 Pin Flasher Relay can handle bulbs, LEDs and a mixture of both on the vehicle it does not care it just gets on with the job!

The RDX 4 Pin Flasher Relay blows others in to the weeds, why as ours is tuneable this means it can be adjusted to suit your vehicle by simply turning the adjustment knob on top of the RDX 4 Pin Flasher Relay. MOT law changed resulting in the trailer light must flash when a trailer is connected and the indicators/hazard is used. The MOT station can now test the towing socket if fitted! Other Flasher Relays cannot detect a trailer has been connected which is now a requirement. Now for the OCD ones Have you noticed when you indicate the trailer light may flash once even when you are not pulling a trailer, well most other normal cars do not put a trailer light on for one flash.

Well ours puts the trailer light when you are actually pulling a trailer. When you are driving without the trailer and you indicate the little trailer light will not flash. The trailer must be using incandescent bulbs or LED lamps with load resistors for the Trailer light to flash. It cannot detect trailers solely on LED lamps it will make them flash ok but will not flash the trailer light as the extra load is too little to detect.

The competition still offer load resistors we have moved into 21st century offering you bespoke products especially for Land Rovers because we drive Land Rovers! The Flasher Relay is in three locations depending on your Land Rover Defender 90/110 Fitting: 1983 to 2001 2.5 NA, Turbodiesel, V8, 200Tdi, 300Tdi, early Td5 (no posh centre console models) Fit LEDs to vehicle Remove two knobs securing fusebox cover Remove fusebox cover Put hazards on if need locate second from left black relay Remove relay and say bad relay Fit RDX 4 Pin Flasher Relay Turn ignition on, indicate left or right you chose Turn knob on RDX 4 Pin Flasher Relay until Trailer light is flashing now turn back slowly until trailer light is not flashing.

Turn ignition off Refit Fusebox cover Refit two knobs Fitting: Later Td5 2001 to 2006 (Posh centre console models). Fit LEDs to vehicle Remove 4 screws securing Instrument surround.

Lift Instrument surround up Put hazards on if need locate black relay on far right Remove relay and say bad relay Fit RDX 4 Pin Flasher Relay Turn ignition on, indicate left or right you chose Turn knob on RDX 4 Pin Flasher Relay until Trailer light is flashing now turn back slowly until trailer light is not flashing. Turn ignition off Refit Instrument surround Refit 4 screws 2007 onwards Tdci (2.4 & 2.2) Fit LEDs to vehicle Relay is located under dash driver side.

Put hazards on if need locate black relay Remove relay and say bad relay Fit RDX 4 Pin Flasher Relay Turn ignition on, indicate left or right you chose Turn knob on RDX 4 Pin Flasher Relay until Trailer light is flashing now turn back slowly until trailer light is not flashing. The item "6 RDX Slimline LED REAR NAS Lights Standard Plinth Relay Defender 1994 to 2016" is in sale since Saturday, March 23, 2013. This item is in the category "Vehicle Parts & Accessories\Car Parts\External Lights & Indicators\Other External Lighting Parts". The seller is "boltonbits" and is located in Bradford, West Yorkshire. This item can be shipped to all countries in Europe, United States, Canada, Australia.

  • Brand: RDX
  • Intended Use: Modification/ Enhancement
  • Manufacturer: Land Rover
  • Manufacturer Part Number: 1
  • Model/ Series: Defender
  • Type: Lights


6 RDX Slimline LED REAR NAS Lights Standard Plinth Relay Defender 1994 to 2016